Subaru WRX Forums banner
1 - 1 of 1 Posts

· Registered
1 Posts
Discussion Starter · #1 ·
Hi all,

I have a 2009 wrx purchased recently. I was driving the other day hit a bit of a bump and hear a loud whistle.

had a look, the intercooler hot side has moved out of alignment with the turbo. Took it off to have a look, it looks like the previous owner has drilled a hole next to where the bolt should go in to the hot side to hold it in as the hold looks more like an oval shape. Itwas held in with a much smaller bolt and nut which I didn’t notice before.

Any advice on if this can be fixed ? Eg. welded shut or a hightemp silicone?

Any advice is appreciated
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.