[OGB]

I'm not very active on the forums and do not update this thread often.

This car is located in Chicago and is for sale.



Current Mods
-ACT Clutch and Flywheel
-AEM WideBand
-AEM TruBoost EBC
-Agency Power Billet Pitch Stop Mount
-ARP Head Studs
-Axis Power Racing Stage 2 Short Block
-Belt Tensioner Conversion 02-07
-CBE Delete (open downpipe)
-Cobb AP ProTune
-Cobb Battery Tie Down
-Cobb Springs
-CoolingMist Water/Meth Injection
-Deatsch Werks 750cc Injectors
-Drag DR-34 17"
-Falken ZE-512 235/45/17
-FP Green
-Greddy Extreme Timing Belt
-NGK Spark Plugs 1 step colder
-Rear Wiper Delete
-Rebuilt Stock Heads
-Seibon Carbon Fiber Hatch
-Seibon Carbon Fiber Hood
-StopTech Brake Pads
-StopTech Power Slot Rotors
-StopTech Stainless Steel Brake Lines
-STi RA Gear Set
-Perrin Dual Gauge Pod
-Perrin Turbo Inlet Hose
-Perrin Radiator Hoses
-Perrin UpPipe
-UltimateRacing Cold Air Intake
-UltimateRacing Downpipe
-UltimateRacing FMIC
-Wing Delete?


Coming Soon
External Wastegate
Tial BOV
New Tune





Here are a few pictures and some videos. I will take more when i have the opportunity and keep you all updated on my mods. Pictures here are old.

Videos
extremely outdated!

 

[Courteau]

Re: OGB's Modded DGM 5 Door

looking good ! need some tint

can you get a day pic of your meter ?

 

[askjeffro]

Re: OGB's Modded DGM 5 Door

Nice ride.

Excuse my ignorance, but what do the AEM WideBand and TruBoost EBC do for you?

 

[OGB]

Re: OGB's Modded DGM 5 Door

here is a pic during the day, its not a very good one. i will take a new one tomorrow if i remember.

what do the AEM WideBand and TruBoost EBC do for you?

the wideband lets me monitor my Air/Fuel Ratio.
The TruBoost is an electronic boost controller (EBC), i changed the spring crack pressure on the wastegate and turned up the boost.

 

[OGB]

Re: OGB's Modded DGM 5 Door

looking good ! need some tint

lol, i know. i have been wanting to have it done for a while now but i keep spending money on performance parts.
the tail lights need to be tinted too. maybe one day it will happen.

 

[pehon]

Re: OGB's Modded DGM 5 Door

nice ride! I'm guessing the exhaust is custom from the catback?

 

[OGB]

Re: OGB's Modded DGM 5 Door

nice ride! I'm guessing the exhaust is custom from the catback?

Yes sir it is. The BOV flange was custom made too, laser cut.

 

[pehon]

Re: OGB's Modded DGM 5 Door

nice ride! I'm guessing the exhaust is custom from the catback?

Yes sir it is. The BOV flange was custom made too, laser cut.

nice..

and maybe you can show us how does ur gauges look like from the driver's view.

 

[GraveDigger611]

Re: OGB's Modded DGM 5 Door

nice work, looks clean

 

[Wing_Zero]

Re: OGB's Modded DGM 5 Door

Nice car, Nice gauge and can you tell me how your pod was installed? pics?

 

[OGB]

Re: OGB's Modded DGM 5 Door

Nice car, Nice gauge and can you tell me how your pod was installed? pics?

i was going to use some velcro to hold it down, but it stays in place as is. no screws, no tape, no velcro... just gravity.

 

[kulle]

Re: OGB's Modded DGM 5 Door

OGB:

Is your wastegate stock? If so how can you increase tension?
Does your aftermarket BOV give anymore power? - any pssshh sound? I didnt think so since you are recirc' ing it.

 

[OGB]

Re: OGB's Modded DGM 5 Door

Is your wastegate stock? If so how can you increase tension?
Does your aftermarket BOV give anymore power? - any pssshh sound? I didnt think so since you are recirc' ing it.

the wastegate is stock, but i can controll when it opens with the AEM TruBoost.
as for the BOV, if you have to tools to do a boost leak test... try it. un hook the recirc from the BOV and you will notice the stock boost leak. The aftermarket BOV elimated the boost leak and alowed me to turn up the boost a little. I originally had this Greddy BOV on my 97 Eclipse and it sounded great. So before i sold the car i took it off for use on my WRX. If i don't recirculate it, it sounds nice. But i didn't like what the A/F ratio was doing. With it recirculated i can barely hear it from inside the car.

 

[OGB]

Re: OGB's Modded DGM 5 Door

Got the UR Cold Air Intake during lunch today.
i would have put it on after work, but the weather isn't cooperating.
maybe tomorrow. the original post has the picture.

Coop, put your's on first. i need to know if my car will blow up if i put mine on.
or should i do mine first and let you know if the A/F ratio is good?

 

[Courteau]

Re: OGB's Modded DGM 5 Door

Its nice from you guy to experiment first before i start modding my engine, i will know better what to do and what not to do haha

 

[coopwrx]

Re: OGB's Modded DGM 5 Door

Yeah... Put yours on first and let me know if the AFR is good.

 

[OGB]

Re: OGB's Modded DGM 5 Door

Its nice from you guy to experiment first before i start modding my engine, i will know better what to do and what not to do haha

hahaha. sure. anytime.

Yeah... Put yours on first and let me know if the AFR is good.

ok. i should have it on tomorrow after lunch, i have a short day of work.
my guess it that the AFR will be fine. with the cat back and more boost, the car is running good... just a little rich.
i dont expect it to go lean on me all of a sudden.

 

[coopwrx]

Re: OGB's Modded DGM 5 Door

Alright. Let me know. I am interested to see what it runs at.

 

[OGB]

Re: OGB's Modded DGM 5 Door

Alright. Let me know. I am interested to see what it runs at.

ok, i got it on. the only tools you will need are a flat tip screwdriver, phillips screwdriver, 10mm wrench, and 10mm socket w/ long attachment.

Coop, you will be very happy with the way your car sounds. You can hear the turbo spool... sounds good. I am also able to hear my BOV with the recirc on. it's loud enough to let people know you have something under the hood. Pictures are up on the original post and my CarDomain.

The AFR is fine, nothing that you need to worry about. I will keep monitoring it.

 

[coopwrx]

Great. I didn't wait for your report. Just went ahead and did it. Sounds great. Glad to hear the AFR is good. I have the stock BOV on and I can hear it dumping the air back into the intake. The turbo really sounds good though. A very very good bolt on. I did have a little trouble with getting the silicone hose on the stock turbo inlet pipe. It was very difficult, it seemed that the hose was a little bit too small.