Subaru WRX Forums banner
1 - 1 of 1 Posts

·
Registered
Joined
·
3 Posts
Discussion Starter · #1 ·
Looking for suggestions here.
My friend and I bought a 13 wrx hatch with blown engine.
Rebuilt the engine and keep getting a p0018 code

We have swapped the cam sensors, oil control valves and recently installed a new cam gear, timing belt tensioner, pulleys etc.

When the car is running above idle, the code will never show up and the car runs exactly perfect. However when you get to a stop light and idle, it comes right on.
We have used a snapon ethos and hp tuners to read the code. The hp tuners will actually detect the code with just the key on. The snap on needs it running.

Any other suggestions? When code is off, car is perfect. Before anyone asks, the timing is perfect on the belt etc. There's no other issues.
 
1 - 1 of 1 Posts
Top